Smart Curtain Motor - How To Install Electric Curtains

How to install electric curtain -smart curtain motor?

1. Before installing the electric curtain, the track must be installed, and the position of the fixing hole and the total length of the track need to be measured. If the track is curved, other measurement methods must be used. After the measurement is completed, it can be installed on the wall. Draw a line on the top and set the installation position of the track.

2. After positioning, the lifting clamp can be installed on the smart electric curtain motor. The clip is installed with screws. First, rotate the clip 90 °to connect to the track normally, and then connect the clip and the top plate to each other with self tapping screws.

3. Next is the connection of the motor. After connecting the wires according to the instructions, the motor and track can be connected to each other. The motor has a specially configured gearbox. One end is connected with the motor is the main transmission box, and the other end is the auxiliary transmission box. The installation method is to put the motor into the main transmission box at an angle of 90° , rotate it clockwise by 90 °, and then push the card to the limit position of the transmission box. The connection can be completed after automatic locking.

4. Adjust the operation of the motor. The adjustment method shall comply with the manufacturer's manual of electric curtain.